IKO LINEAR ROLLER WAY SUPER X APPLICATION SHEET (Single Axis)

(When machine has Multiple Axes (2 or more),  please fill out an Application Sheet for each axis.   You will also need to provide drawings showing the structure of the machine. )

Part #1

Your Name:
Title:
Company Name:
Street address:
Address (cont.):
City:
State/Province:
Zip/Postal code:
Country:
Phone:
FAX:
E-mail:

Part #2

Machine Name:
Machine Model:
Description of Mechanism:
Application:

New design   

Redesign (current linear guide:)
Production Schedule:
Demand: /year
Axis Name:
Description:

 

Mounting Condition

 

(check only one)

Horizontal

Lateral

Vertical

Shape of Slide Unit

Flange Type    Block Type
Compact Block  Low Section

Size of LRX or MX

 (select desired size from drop-down menu)

Length of Slide Unit

(select desired size from drop-down menu)
# of Slide Units per Rail:
# of Rails per Machine:

Direction of Reference Surface

A    B    C    D  

E    F    G    H

Basic Identification Number:

 

Load Condition

Wx amount (for Lateral Mounting only):

 specify unit of measurement (kfg, lb, etc.)
Wy amount (for Vertical Mounting only): specify unit of measurement (kfg, lb, etc.)
Wz amount (for Horizontal Mounting only): specify unit of measurement (kfg, lb, etc.)
Distance a: specify unit of measurement (mm, in, etc.)
Distance b: specify unit of measurement (mm, in, etc.)
Distance c: specify unit of measurement (mm, in, etc.)
Distance d: specify unit of measurement (mm, in, etc.)
Distance e: specify unit of measurement (mm, in, etc.)
Distance f: specify unit of measurement (mm, in, etc.)
Distance g: specify unit of measurement (mm, in, etc.)
External Load (Please provide detail information )
External Load Amount: specify unit of measurement (kfg, lb, etc.)
Location & Direction (Please provide drawing and/or description):
External Moment Load Amount: specify unit of measurement (kfg, lb, etc.)
Location & Direction (Please provide drawing and/or description):
*Other Load (please specify amount and direction):

If using 3 or more slide units on a single rail, please provide sketch or drawing showing load distribution. 

Part #3

Driving Pattern

Stroke Length: specify unit of measurement (mm, in, etc.)
Maximum Speed (V): specify unit of measurement (m/min, in/sec, etc.)

Acceleration time (ta):

sec
Deceleration time (tb): sec
Constant speed time (tc): sec
Positioning time: sec
Rest time: sec
Number of strokes: specify unit of measurement (per minute, etc.)
Cycle time: specify unit of measurement (secs, mins, etc.)
Working time: hours/day,days/week
Type of Lubricant: (select type from drop-down menu)
Lubricant name:
Maintenance Free option: (select from drop-down menu)
Interchangeable Spec: (select from drop-down menu)
Preload: (select from drop-down menu)
Accuracy Grade: (select from drop-down menu)

Options  for Accuracy
Matched Sets to be used as an assembled group (/W2)
Attach Inspection Sheet (/I)

Mounting Specification

       *Track Rail length = E1+ n x F + E2
Track Rail Length: mm
E1 dimension: mm
E2 Dimension: mm
Mounting Bolts for Track Rail: (select from drop-down menu)
Half Pitch rail specification (/HP) required
Middle row Mounting Holes are offset on Slide Units (/GE) 

Dust Protection on Track Rail
Caps for rail mounting holes (/F) required    

(select desired type from drop-down menu)
Rail Cover Plate (/PS) required
Tapped for Bottom Mounting of Track Rail (special)

Dust Protection on Slide Unit
Female threads for mounting bellows (/J) (select desired ends from drop-down menu)
C-Wiper (/RC) (select desired ends from drop-down menu)
C-Lube Plate (/Q) (select desired ends from drop-down menu)
Double End Seals (/V) (select desired ends from drop-down menu)
Scrapers (/Z) (select desired ends from drop-down menu)
Inner Seals (/UR)

Rust Prevention
Black Chrome Surface Treatment (select options from drop-down menu)
Fluoric Black Chrome Surface Treatment (select options from drop-down menu)

Port for Centralized Lubrication (Oil Connectors) 
Type of Lubrication Port: (select type from drop-down menu)
Port Size: (select type from drop-down menu)dia or other info

Indicate Lubrication Connector Location: (example: #1-E, #2-F, #3-E, #4-F)

Operating Environment

 Normal

Low/High temperature to C

Humidity %

Dust condition (describe)

Clean room condition (class)

Vacuum condition torr
Other Requirements:

Form can be filled out and submitted directly over the internet or printed, filled out and faxed to the office closest to you.  Please see our Contact Page for the fax numbers.

Copyright? 2009 - IKO / Nippon Thompson Co., Ltd.